Correct cleaning method of air suspension fan
We all know that the air suspension centrifugal blower must be cleaned after a long time of use. In order to clean the air suspension centrifugal blower thoroughly, we need to dismantle the blower. Because of the complex internal structure of the air suspension centrifugal blower, it is difficult to clean it. It is very important to clean the air suspension centrifugal blower correctly.
Dismantle the fan: first of all, dismantle the casing and bearing box. If these two parts are not dismantled first, the whole fan cannot be cleaned. Secondly, in the process of cleaning, we need to pay special attention to the fact that it is not allowed to disassemble and clean the motor direct drive to the fan, so as to prevent the mechanical failure of motor burning.
Assembly of fan: firstly, use a pair of inclined pad iron pads and put them on the foundation. Secondly, whether cleaning or assembling the air suspension centrifugal blower, first check its regulating mechanism to see its rotation flexibility.
Only by the correct cleaning method can the normal use of the fan be ensured and the production work is not affected.
Before setting up equipment, we need to do the following:
1: before start-up, it is necessary to confirm whether the water level of each valve in the air outlet pipe of the fan and the water level outside the pond are equal to the water level difference during normal operation
2: before starting, it is necessary to confirm whether the operation mode of the fan is different from the requested operation mode. If there is no difference, please mediate according to the user manual.
3: before startup, confirm whether the frequency of fan startup and operation is proper (according to the theoretical situation on site, it is being adjusted between 1% and 99%).
4: confirm whether the relief valve is normal during startup.
5: check whether the operation data of touch screen is normal during startup.
6: confirm whether the sound of fan is abnormal during operation.